1. Jaw Crusher

The jaw crusher is the material that is squeezed and crushed by the material between the two jaw plates. It is characterized by large crushing ratio, uniform product particle size, simple structure, reliable operation, easy maintenance and economical operation cost.

Jaw Crusher

2. Impact Crusher

Impact crusher is a crushing machine that uses impact energy to crush materials. It is characterized by novel structure, stable operation, low energy consumption, high output, stable operation, multi-cavity uniform crushing, suitable for crushing hard rock, convenient use and maintenance, and selective crushing.

Impact Crusher

3. Cone Crusher

Both the cone crusher and the jaw crusher are extrusion crushers, but the principles are different. The cone crusher rarely achieves the crushing of materials through the cooperation of the movable cone and the fixed cone. It is characterized by large crushing force, high efficiency, high processing capacity, low action cost, convenient adjustment, practical and economical, uniform particle size of crushed products and long service life.

Cone Crusher

4. Impact Crusher

The impact crusher is the whole crushing process that the material is subjected to two or more times of impact crushing in the vortex crushing chamber. The materials are crushed by the impact of each other. It is characterized by low energy consumption, high output, small size of equipment, simple operation, convenient installation and maintenance. During the production process, the stone can form a protective bottom layer, and the body has no wear and is durable.

Impact Crusher

5. Hammer Crusher

Hammer crusher is that when the material enters the turntable and rotates, the hammer hits the material loaded into the machine due to centrifugal force and rotational force to break it. It is characterized by simple structure, small self-weight, high productivity, small and uniform product particle size, and less excessive crushing.

Hammer Crusher

6. Double Roller Crusher

The double-roller crusher rolls the fed material into the crushing cavity formed by the two rollers and is crushed by the friction between the material and the rollers. Its characteristics are that the discharge particle size can be adjusted at will, the footprint is small, it is not restricted by installation, the production capacity is high, and the operating cost is low.

Double Roller Crusher

7. Roller Crusher

Roller crusher is also called counter-roller crusher. When the material enters between the two rollers, due to the action of friction, the ore is brought into the crushing space between the two rollers and crushed by extrusion. It is characterized by simple structure, small occupied space, and convenient operation and maintenance. The interior is equipped with a dust-proof plate, which has good sealing performance and avoids the splashing of small materials after crushing. There is less dust, low working noise, and the working environment is greatly improved.

Roller Crusher

8. Toothed Roller Crusher

The toothed roller crusher uses a special wear-resistant toothed roller to rotate at a high speed to split and crush the material, forming a mechanism of high productivity. It is characterized by dual functions of screening and crushing, dual overload protection, flexible assembly, convenient maintenance, reasonable structure and long service life.

Toothed Roller Crusher

9. Vertical Crusher

The material enters the cavity of the vertical crusher and is hit by the high-speed rotating plate hammer, hits the toothed counterattack plate on the first counterattack plate on the top of the crushing cavity, rebounds, and enters the second crushing cavity. Under the action of wear-resistant tooth plate and plate hammer, huge pressure, bending force and friction force are generated. The materials are sufficiently finely ground in the crushing chamber and discharged from the machine. It is characterized by simple and reasonable structure, low operating cost, low wear and tear, high crushing rate, and the functions of fine crushing and coarse grinding.

Vertical Crusher

10. Raymond Mill

Raymond mill uses the grinding roller to tightly roll on the grinding ring under the action of centrifugal force, and the material is shoveled by the shovel and sent to the middle of the grinding roller and the grinding ring, and the material is broken into powder under the action of the grinding pressure. It is characterized by the vertical structure of the whole machine, small footprint, strong systematicness, centralized control of the electrical system, and basically unmanned operation in the grinding workshop.

Raymond Mill

11. Sand Making Machine

When the material enters the crushing cavity of the sand making machine from the feeding port, it is divided into two parts by the powder feeder, and one part enters the high-speed rotating impeller, which is driven by the impeller to accelerate rapidly, and then the material is thrown out from the three evenly distributed flow channels of the impeller at high speed. . It is characterized by large processing capacity, high output, low consumption of wearing parts, hydraulic device, easy maintenance, time-saving and labor-saving.

Sand Making Machine

12. Ball Mill

The ball mill is supported by rolling bearings, and drives the cylinder to rotate through the transmission device, so that the material and steel balls rotate together with the cylinder, and complete the dropping, impact, impact and self-grinding operations in the cylinder to achieve material grinding. It is characterized by high grinding efficiency, good lining quality, flexible design of the discharge part, large feeding volume of the feeding part, and the use of a closed system to reduce dust.

Ball Mill

13. Bucket Elevator

Bucket elevator refers to the transportation equipment that continuously transports materials on traction parts such as belts or chains. It is characterized by small driving power, wide range, good sealing, less environmental pollution and long service life.

Bucket Elevator

14. Vibrating Screen

The vibrating screen divides the crushed and bulk materials with different particle sizes through the single-layer or multi-layer screen surfaces with uniform holes for many times and divides them into several different levels. The process is called screening. It is characterized by strong exciting force, simple structure, convenient and quick maintenance: high screening efficiency, large processing capacity, long life, low power consumption and low noise.

Vibrating Screen

15. Linear Vibrating Screen

The linear vibrating screen is driven by double exciters. When the two exciters rotate synchronously and in opposite directions, the exciting force generated by the eccentric block cancels each other in the direction parallel to the axis of the motor, and in the direction perpendicular to the axis of the motor. The directions are superimposed as a resultant force. It has the characteristics of low energy consumption, high efficiency, simple structure, easy maintenance, and fully enclosed structure without dust spillage.

Linear Vibrating Screen

16. Circular Vibrating Screen

The circular vibrating screen is a kind of circular vibrating, multi-layer, new vibrating screen. The circular vibrating screen adopts a cylindrical eccentric shaft exciter and an eccentric block to adjust the amplitude. The material screen has a long flow line and a variety of screening specifications. It has reliable structure, strong excitation force, high screening efficiency, low vibration noise, sturdy and durable, and maintenance. Convenient and safe to use.

Circular Vibrating Screen

17. Multi-layer Vibrating Screen

The multi-layer vibrating screen is composed of multiple discharge ports, which can divide the finished materials into various specifications. One machine has the functions of multiple devices, which saves time, labor and space. It can save investment, diversify screening, and meet various needs and user standards.

Multi-layer Vibrating Screen

18. Vibrating Feeder

A vibrating feeder is a device that uses the principle of vibration for feeding. The vibration is stable, the work is reliable, and the service life is long; the exciting force can be adjusted, the noise is low, the power consumption is small, the adjustment performance is good, and there is no material punching phenomenon. Simple structure, reliable operation, convenient adjustment and installation, light weight, small volume, convenient maintenance, and can prevent dust pollution when the closed structure body is adopted.

Vibrating Feeder

19. Belt Conveyor

The belt conveyor is a conveyor belt that is supported by the upper and lower idlers as a bearing member and a traction member, and bypasses the head and tail rollers to form a closed loop conveying machine. It transmits power by means of the friction between the driving roller and the conveyor belt. Realize material transportation. It has various structural forms, various types of materials to be conveyed, simple structure, easy maintenance, low energy consumption, and low cost of use.

Belt Conveyor

20. Belt Hanging Iron Remover

When the material sent above the belt passes under the belt suspension iron remover, the ferromagnetic material mixed in the material is adsorbed on the discarded iron belt under the action of the strong magnetic attraction force, and is brought to the edge of the magnetic system, relying on the ferromagnetic material The inertia and gravity will throw it into the iron collecting box, so as to achieve the purpose of automatically and continuously eliminating ferromagnetic substances in the coal flow. It is characterized by automatic iron unloading, easy maintenance, good dust-proof, moisture-proof and corrosion-proof ability.

Belt Hanging Iron Remover


Related Articles

Submit Your Requirement Below For Mineral Processing Proposal!

Please contact whatsapp number via +86 13918045927 for detailed information!